LevelOne FCS-3091 Manuel d'utilisateur télécharger pdf (Page 76)

Intelligent Surveillance Solution

LevelOne IP CamSecure

- 75 -

Advanced Setting

I/O Device Setting:

 Module Setting: Name the module device and ID that has been connected to the digital input/output

device(s) to your system.

 Device: This column displays the device(s) already installed to the system.

 ID: Select the number of the I/O port to which you plug the ribbon cable.

Input Monitor: The device(s) is turned on if the dot is red. By triggering the digital input device, the related

icon will light up. This is used to check that

the device is correctly

connected.

Output Monitor: The device(s) is turned on if the dot is red. By clicking on the icon, you may trigger the digital

device connected to the system. This can be used to test if the output device is correctly connected.

Device Setting

 Name: Insert the name of the device (input and output).

 Type: Select the device type from the drop-down menu.

1. N/O: Normal Open.

2. N/C: Normal Close.

 Associated Camera: You may assign one camera to each digital input device. Smart Guard will

collect snapshots from these cameras upon certain triggered events. For details please refer to 4.2 -

Action. DI’s included with IP cameras will keep its own camera as default associated camera.

5.4 Setting - PTZ Config

Install PTZ cameras and follow the instructions of the camera manufacturer. A PTZ camera is usually

connected to the PC with RS-485/RS-422.

Basic Setting

Miscellaneous

Output Monitor

Input Monitor

List of devices

I/O Device Setting

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 138 139

Pas de commentaire

LevelOne FCS-3091 Manuel d'utilisateur Page 76