LevelOne FCS-4102 Manuel d'utilisateur télécharger pdf (Page 52)

Network Camera User’s Manual

52/61

Maintenance

1. “Reboot system” The “Reboot” button will reboot the Network Camera. It’s useful

while the Network Camera got problem.

2. “Restore system” Click on “Restore” button on the configuration page to restore

the factory default settings. Restore all settings to factory default except settings in

“Network type ” and “Root Password”. The system will restart and require the installer

program to set up the network again.

3. “Calibrate” Recalibrate the home position to the default center to recover the

tolerance cased by some external forces. Please note that there is no confirming

message box after clicking on the “Calibrate” button, the Network Camera will calibrate

immediately.

4. “Export/Import file”

-- Export setting backup file: Click to export all parameters for the device and

user-defined scripts.

-- Upload setting backup file: Click Browse… to upload a setting backup file. Please note

that the model and firmware version of the device should be the same as the setting

backup file. If you have set up a fixed IP or other special settings for your device, it is not

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 60 61

Pas de commentaire

LevelOne FCS-4102 Manuel d'utilisateur Page 52