Levelone WBR-3407 11g Manuel d'utilisateur télécharger pdf (Page 38)

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the WBR-3407's Access Point,

regardless of the operating system which is used on the client.

To use the WBR3407 in the WBR-3407, each Wireless Station must have compatible settings,

as follows:

Mode

The mode must be set to Infrastructure (rather than Ad-hoc)

Access points only operate in Infrastructure mode.

SSID (ESSID)

This must match the value used on the WBR-3407. The default value is

wireless.

Note! The SSID is case sensitive.

Wireless

Security

By default, Wireless security on the WBR-3407 is disabled.

• If WEP or WPA-PSK is enabled on the WBR-3407, each station

must use the same settings as the WBR-3407.

• If WPA-802.1x is enabled, each station must obtain a cerrtificate for

authentication. See the following section for details.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 98 99

Pas de commentaire

Levelone WBR-3407 11g Manuel d'utilisateur Page 38