LevelOne DSA-1000 Manuel d'utilisateur télécharger pdf (Page 20)

Appendix E - Command Line Interface

Appendix B. Firmware Upgrade

Software tools tftpd32 is required in the upgrade procedure, please download and install tftpd32 before you

proceed further.

Note:

Tftpd32 can be downloaded from the following link:

http://tftpd32.jounin.net/tftpd32.html

Step1: Place the new firmware of DSA-1000 on a local location (for example desktop) in the PC that is

accessing DSA-1000’s web interface and performing the upgrade.

Step2: Configure the TCP/IP settings of your PC with an IP address under the same subnet mask as DSA-

1000. For example 192.168.1.20

Step3: Launch tftpd32 and click the DHCP tab.

1. In “Current Directory” field, browse for the location path where the firmware is stored.

2. Enter the IP address of your PC in “Server interfaces” field.

3. In “IP pool starting address” field, enter the start IP address of an IP segment that is available for

allocation.

4. Set the size of the IP pool.

5. Enter the firmware filename in “Boot file field”.

6. Enter 255.255.0.0 in the “Mask” field.

7. Click Save button.

Note:

Please make sure that the location path and the firmware for up-

grade is correct.

1 2 ... 15 16 17 18 19 20 21

Pas de commentaire

LevelOne DSA-1000 Manuel d'utilisateur Page 20