LevelOne WAB-7000 Manuel d'utilisateur télécharger pdf (Page 32)

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0

3.4 LAN Settings (Static / DHCP)

 Click on the LAN link on the navigation drop-

down menu. This feature allows you to

configure the LAN interface using a static IP

address or as a DHCP client. This IP address is

also used to access the web-based interface.

 IP Address Mode: Select the Static or DHCP radio button. If you select DHCP radio

button, you are not required to enter the rest of the fields, as the IP address will be

provided to the device by the AP or DHCP server. If you select the Static radio

button, you must enter the IP address, subnet mask, and default gateway.

 IP Address: Enter an IP address for this device.

 Subnet Mask: Enter the subnet mask for this IP address.

 Default Gateway: Enter the IP address of the default gateway.

 Click on the Save Settings button once you have modified the settings.

Note: If you change the IP address here, you may need to adjust your PC’s network

settings to access the network again.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Pas de commentaire

LevelOne WAB-7000 Manuel d'utilisateur Page 32