LevelOne Router WBR-3600 Manuel d'utilisateur télécharger pdf (Page 12)

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the

Wireless ADSL2+ Router. Both 10BaseT and 100BaseT connections can be used

simultaneously.

If required, connect any port to a normal port on another Hub, using a standard

LAN cable. Any LAN port on the Wireless ADSL2+ Router will automatically

function as an "Uplink" port when required.

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the ADSL port on the Wireless ADSL2+

Router (the RJ11 connector) to the ADSL terminator provided by your phone

company.

4. Power Up

Connect the supplied power adapter to the Wireless ADSL2+ Router. Use only the

power adapter provided. Using a different one may cause hardware damage.

5. Check the LEDs

• The PWR LED should be ON.

• For the LAN (PC) connection, one of the LAN LEDs should be ON (provided the

PC is also ON.)

• The WLAN LED should be ON

• The DSL LED should be ON if ADSL line is connected.

• The NET LED may be OFF. After configuration, it should come ON.

For more information, refer to Front-Panel LEDs in Chapter 1.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Pas de commentaire

LevelOne Router WBR-3600 Manuel d'utilisateur Page 12