Levelone KVM-0410 Manuel d'utilisateur télécharger pdf (Page 11)

LevelOne

-------------------- Cascade Configuration

Connection

Before connecting a device (a computer or a Slave KVM Switch) to a

KVM Switch under power, you must turn off the device.

Note: The Master must have equal or more 'PC x' ports than that of

the Slave, i.e., if an 8-port switch is the master, a 4-port or an 8-port

switch can be a Slave, but not a 16-port one. PS/2-only models can

be cascaded with USB-PS/2 combo models.

The ports labeled "PC 1"~”PC 8” can be connected to either a

computer or a Slave's CONSOLE port, as shown in figure 10. The

ports “PC A"~”PC H” can only be connected to computers.

Figure 10: Slave console connection

Note: Use only 1-to-3 (PS/2) cables for connection between the

Master’s PC ports and a Slave’s CONSOLE port in cascade

application.

The maximum number of computers controlled by a master/slave

configuration with all 4-port units is 16 -- with 4 Slaves and each Slave

connects to 4 computers, see figure 11.

LevelOne

Figure 11: All 4-port KVM Switches in cascade

The maximum number of computers controlled by a master/slave

configuration with all 8-port units is 64 -- with 8 Slaves and each Slave

connects to 8 computers, see figure 12.

Figure 12: All 8-port KVM Switches in cascade

The maximum number of computers controlled by a master/slave

configuration with all 16-port units is 136 -- with 8 units of 16-port

Slaves (to "PC 1"~”PC 8”) and each Slave connects to 16 computers;

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Levelone KVM-0410 Manuel d'utilisateur Page 11