Levelone KVM-0410 Manuel d'utilisateur télécharger pdf (Page 6)

LevelOne

------------------------ Operation

Figure 7: Front pushbuttons and LEDs

Pushbuttons

A computer may be selected by pressing the pushbutton directly, by

issuing hotkey commands or by activating the OSD window.

Note: For 16-port models: 1 ~ 8 represent the lower 8 ports and A ~

H for the higher 8 ports. To select computer A, press and hold

pushbutton 1 for 2 seconds; for computer B, press and hold

pushbutton 2, etc.

! K/M RESET

K/M RESET solves most problems developed by keyboard, mouse,

device replacement or change of configuration. Press down both the

front-panel number 1 and 2 pushbuttons for 2 seconds to re-configure

the whole system without turning either the KVM Switch or any

computer off.

! AUTO SCAN

LevelOne KVM Switch provides an easy-to-use feature to start Auto

Scanning. For 8 and 16-port, you can press down both the front-panel

number 7 and 8 pushbuttons for 2 seconds to start Auto Scanning.

And for 4-port KVM, you can press down both number 3 and 4 to start

Auto Scanning.

LEDs

The lighting red LED indicates the port that is selected. The port is

LevelOne

either Auto Scan or Manual Scan mode if the red LED flashes.

Green LED is lighting when the port connects a power-on computer.

There are 2 rows of LEDs for 16-port switches, the lower row is for

numerical ports (“1” ~ “8”) and the upper row is for alphabetical ports

(“A” ~ “B”).

OSD (On-Screen-Display) Operation

Figure 8: OSD screen illustration

USB-PS/2 Combo models offer F5, see Function key <F5>

By hitting the left <CTRL> key twice within two seconds, you may see

the 'Hotkey Menu' if it is enabled (an OSD option). Or, by hitting the

left <CTRL> key three times within two seconds, you will see a 'KVM

MENU' screen showing a list of the computers with corresponding

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Pas de commentaire

Levelone KVM-0410 Manuel d'utilisateur Page 6